No drawing image
01399449
GTBN402-51-29-HGG
- 40-Ton HGG
- 3
- 29'
Lowboy · Drawing
01418389
GTBN402-51-29-HGG
- Capacity
- 40-Ton HGG
- Number of Axles
- 3
- Lower Deck Length
- 29'
- Overall Length
- 617"
- Rear Deck Height
- 42"
- Lower Deck Height
- 20"
- KingPin Style
- Fixed
- Model Type
- Full Deck
Specifications 42 of 49 fields recorded
Dimensions & Capacity
| Model Type | Full Deck |
|---|---|
| Capacity | 40-Ton HGG |
| Rear Deck Height | 42" |
| Lower Deck Height | 20" |
| Lower Deck Length | 29' |
| Rear Deck Length (PO) | 122" |
| Rear Deck Length (Design) | — |
| Overall Length | 617" |
| Overall Width | 102" |
| Ground Clearance | 6" |
Gooseneck & King Pin
| GN Length | 147" |
|---|---|
| KingPin Style | Fixed |
| KingPin Setting | 16" |
| Swing Clearance | 102" |
| Fifth Wheel Height | 50" |
| Ride Height | 5-Position |
| Well Decking | Removable D-Plate - Full Length |
Frame & Deck
| Main Beam Center | 40" |
|---|---|
| Deck Main Beam | 14" T-1 Steel |
| Deck Side Rail | 14" T-1 Steel |
| Crossmembers | 10" & 4" on 12" Centers |
| Outrigger Type | Removable Std. |
| Front Ramps | Steel 18" x 31" Std. |
| Riser (Transition) Ramp | 35° Rear Bridge Ramp |
| Rear Deck Beam | 16.5" T-1 Steel |
| Rear Well Style | Boom & Bucket Well |
| D-Ring in Tail | 2 Ea Side |
| Rear Deck Option (Beavertail) | — |
| Wood | 1.75" Apitong - Open Center |
| Wheel Covers | Steel Covered D-Plate |
| Rear Bolster D-Rings | — |
Axles & Suspension
| Number of Axles | 3 |
|---|---|
| Axle Spacings | 54" |
| Axle Track | 76 1/2" |
| ABS | 2S1M |
| Axle 1 | Fixed Type 30/30 Non-ABS |
| Axle 2 | Fixed Type 30/30 ABS |
| Axle 3 | Hydraulic Flip Type 30 Non-ABS |
| Axle 4 | — |
| Suspension Type | Cush Air Ride Suspension - 25K |
| Dump Type | Manual |
| Ride Height Adjuster | Turn Dial |
| Flip Axle Set Up | Set up for hydraulic powered flip |
Wheels & Electrical
| Tire | 255/70R x 22.5 "H" |
|---|---|
| Rims | 8.25 x 22.5 Hub Piloted Outer Aluminum |
Options & Finish
| Fenders | — |
|---|---|
| Motor | 13 HP Honda - Gas |
| Flip Box Set Up | — |
| Wide Load Sign Cutout | — |
Notes
Lockable tool box in 1st bay behind GN and open storage before rear deck
(2) lights between each outrigger and at bolsters with chrome bezels
All axles to have PSI tire inflation
Trailer bumper to have (4) 4" lights per side
TURN/STOP/STOP/STROBE
See pic for flip axle
(4) sets of lights inside of boomwell with chrome bezels
(2) sets of lights inside each flip axle with chrome bezels
(3) extra lights on each side of GN with chrome bezels
(5) lights in lieu of center light bar on trailer bumper with chrome bezels. Lights to be wired as tail and brake functions
(5) 4" lights in center of flip axle bumper w/ chrome bezels. Lights to be wired as STROBE/STOP/STOP/STOP/STROBE
Chain slots down both side of main deck and rear deck
"California" connections under GN in front side of GN base
No air/electrical cutouts in flip bumper. Add separate control plate inside
All accessories to be Viper Red
No drawing image on file.
