Lowboy · Drawing
01398607
GTBN603-57-30-HGG
- Capacity
- 60-Ton HGG
- Number of Axles
- 4
- Lower Deck Length
- 30'
- Overall Length
- 679"
- Rear Deck Height
- 42"
- Lower Deck Height
- 22"
- KingPin Style
- 2-Position Removable
- Model Type
- Full Deck
Specifications 43 of 49 fields recorded
Dimensions & Capacity
| Model Type | Full Deck |
|---|---|
| Capacity | 60-Ton HGG |
| Rear Deck Height | 42" |
| Lower Deck Height | 22" |
| Lower Deck Length | 30' |
| Rear Deck Length (PO) | 172" |
| Rear Deck Length (Design) | — |
| Overall Length | 679" |
| Overall Width | 120" |
| Ground Clearance | 6" |
Gooseneck & King Pin
| GN Length | 147" |
|---|---|
| KingPin Style | 2-Position Removable |
| KingPin Setting | 16" & 28" |
| Swing Clearance | 102" & 86" |
| Fifth Wheel Height | 50" |
| Ride Height | 5-Position |
| Well Decking | Removable S-Plate - Full Length |
Frame & Deck
| Main Beam Center | 58" |
|---|---|
| Deck Main Beam | 16" T-1 Steel Std. |
| Deck Side Rail | 16" T-1 Steel |
| Crossmembers | 10" & 4" |
| Outrigger Type | Full Height Removable |
| Front Ramps | Integrated Fixed Ramps |
| Riser (Transition) Ramp | 90° w/6' Air Transition Ramps |
| Rear Deck Beam | 16.5" T-1 Steel |
| Rear Well Style | Boom & Bucket V-Style |
| D-Ring in Tail | 4 Ea Side |
| Rear Deck Option (Beavertail) | — |
| Wood | 1.75" Apitong - Open Center |
| Wheel Covers | Steel Covered D-Plate |
| Rear Bolster D-Rings | — |
Axles & Suspension
| Number of Axles | 4 |
|---|---|
| Axle Spacings | 54" |
| Axle Track | 94 1/2" |
| ABS | 2S1M |
| Axle 1 | Fixed Type 30/30 Non-ABS |
| Axle 2 | Fixed Type 30/30 ABS |
| Axle 3 | Super Lift Type 30 Non-ABS |
| Axle 4 | Hydraulic Flip Type 30 Non-ABS |
| Suspension Type | Cush Air Ride Suspension - 25K |
| Dump Type | Manual |
| Ride Height Adjuster | Cush Air Ride Adj. |
| Flip Axle Set Up | Set up for hydraulic powered flip |
Wheels & Electrical
| Tire | 255/70R x 22.5 "H" |
|---|---|
| Rims | 8.25 x 22.5 Hub Piloted All Aluminum |
Options & Finish
| Fenders | — |
|---|---|
| Motor | — |
| Flip Box Set Up | 24" Flip Box & Set Up, Hydraulic Powered Flip Box |
| Wide Load Sign Cutout | — |
Notes
Two (2) Pair 3/4 Lights in Bucket Pan
Four (4) Pair 3/4 Lights in Boom Well
One (1) light per outrigger with three (3) additional lights per side of gooseneck and one (1) light per bolster on tail
Lockable storage in bay one and two (1 &2) behind gooseneck. Lockable box in bay second to last bay before bucket pan Boxes to be solid with drain holes.
Bucket pan to extend to 7ft
One (1) pr D rings in bays three (3), seven (7) and nine (9) behind gooseneck
One (1) pr 3/4" lights in bays six (6) and eight (8)behind gooseneck
Cover bay four and five (4&5) with steel plate. 4 way chain slot to be cut out in center for load securement
Chain slots down outer rails and on to rear deck
All lights to be clear with chrome ring
All tool boxes to have four (4) 3/4" lights mounted in tool box to light up box
Trailer to include an aluminum gooseneck cover mounted on top of gooseneck
Frame Rating 60T at 16'
No drawing image on file.