No drawing image
01285196
GTBN603-57-28-HGG
- 60-Ton HGG
- 4
- 28'
Lowboy · Drawing
01309412
GTBN603-57-28-HGG
- Capacity
- 55-Ton HGG
- Number of Axles
- 4
- Lower Deck Length
- 28'
- Overall Length
- 682"
- Rear Deck Height
- 42"
- Lower Deck Height
- 18" w/ 6" GC
- KingPin Style
- Fixed
- Model Type
- Full Deck
Specifications 42 of 49 fields recorded
Dimensions & Capacity
| Model Type | Full Deck |
|---|---|
| Capacity | 55-Ton HGG |
| Rear Deck Height | 42" |
| Lower Deck Height | 18" w/ 6" GC |
| Lower Deck Length | 28' |
| Rear Deck Length (PO) | 190" |
| Rear Deck Length (Design) | — |
| Overall Length | 682" |
| Overall Width | 108" |
| Ground Clearance | 6" |
Gooseneck & King Pin
| GN Length | 156" |
|---|---|
| KingPin Style | Fixed |
| KingPin Setting | 16" |
| Swing Clearance | 110" |
| Fifth Wheel Height | 50" |
| Ride Height | 5-Position |
| Well Decking | Open |
Frame & Deck
| Main Beam Center | 46" |
|---|---|
| Deck Main Beam | 12" T-1 Steel |
| Deck Side Rail | 12" T-1 Steel |
| Crossmembers | 8" |
| Outrigger Type | Full Height Removable |
| Front Ramps | Integrated Fixed Ramps |
| Riser (Transition) Ramp | 90° w/6' Air Transition Ramps |
| Rear Deck Beam | 16.5" T-1 Steel |
| Rear Well Style | Boom & Bucket Well |
| D-Ring in Tail | 2 Ea Side |
| Rear Deck Option (Beavertail) | — |
| Wood | 1.75" Apitong Full Width |
| Wheel Covers | Steel Covered D-Plate |
| Rear Bolster D-Rings | — |
Axles & Suspension
| Number of Axles | 4 |
|---|---|
| Axle Spacings | 60" |
| Axle Track | 82 1/2" |
| ABS | 2S1M |
| Axle 1 | Fixed Type 30/30 Non-ABS |
| Axle 2 | Fixed Type 30/30 ABS |
| Axle 3 | Super Lift Type 30 Non-ABS |
| Axle 4 | Hydraulic Flip Type 30 Non-ABS |
| Suspension Type | Cush Air Ride Suspension - 25K |
| Dump Type | Manual |
| Ride Height Adjuster | Turn Dial |
| Flip Axle Set Up | Set up for hydraulic powered flip |
Wheels & Electrical
| Tire | 275/70R x 22.5 "H" Sumitomo |
|---|---|
| Rims | 8.25 x 22.5 Hub Piloted All Aluminum |
Options & Finish
| Fenders | — |
|---|---|
| Motor | — |
| Flip Box Set Up | — |
| Wide Load Sign Cutout | — |
Notes
Locking toolbox in GN Base with 2 chain racks
Rod off gooseneck to hold lines in air and off frame
Route Axle 1 air lines under axle
Mounts to bolt on Oversize Load Sign on rear bumper on flip axle and lowboy (Square Mounts)
Outer wheels to be DURABRIGHT wheels with inners to be Alcoa HP
Safety night light package to operate strobes
Two (2) lockable tool boxes behind GN
Trailer to have chain slots on outer rails and rear deck as well as center mounted 4 way strip
Trailer to have manual turn dial suspension
Trailer underside to be undercoated
Decking to be secured via carriage bolts
Trailer to include flange stiffeners
Trailer to be rated at 60 ton in 16ft
Trailer Includes 1 Set of Outrigger Boards (4 Boards)
No drawing image on file.