00311708
GTBN553-55-26-HGG
- 55-Ton HGG
- 3
- 312"
Lowboy · Drawing
01254548
GTBN553-55-26-HGG
- Capacity
- 55-Ton HGG
- Number of Axles
- 4
- Lower Deck Length
- 26'
- Overall Length
- 654"
- Rear Deck Height
- 42"
- Lower Deck Height
- 22"
- KingPin Style
- 2-Position Removable
- Model Type
- Full Deck
Specifications 43 of 49 fields recorded
Dimensions & Capacity
| Model Type | Full Deck |
|---|---|
| Capacity | 55-Ton HGG |
| Rear Deck Height | 42" |
| Lower Deck Height | 22" |
| Lower Deck Length | 26' |
| Rear Deck Length (PO) | 172" |
| Rear Deck Length (Design) | — |
| Overall Length | 654" |
| Overall Width | 102" |
| Ground Clearance | 6" |
Gooseneck & King Pin
| GN Length | 170" |
|---|---|
| KingPin Style | 2-Position Removable |
| KingPin Setting | 16" & 31" |
| Swing Clearance | 125" & 110" |
| Fifth Wheel Height | 50" |
| Ride Height | 5-Position |
| Well Decking | Removable S-Plate - Full Length |
Frame & Deck
| Main Beam Center | 40" |
|---|---|
| Deck Main Beam | 16" T-1 Steel Std. |
| Deck Side Rail | 16" T-1 Steel |
| Crossmembers | 10" & 4" on 12" Centers |
| Outrigger Type | Full Height Removable |
| Front Ramps | Steel 18" x 31" Std. |
| Riser (Transition) Ramp | 90° w/6' Air Transition Ramps |
| Rear Deck Beam | 16.5" T-1 Steel |
| Rear Well Style | Boom & Bucket Well |
| D-Ring in Tail | 3 Ea Side |
| Rear Deck Option (Beavertail) | — |
| Wood | 1.75" Apitong - Open Center |
| Wheel Covers | Steel Covered D-Plate |
| Rear Bolster D-Rings | — |
Axles & Suspension
| Number of Axles | 4 |
|---|---|
| Axle Spacings | 54" |
| Axle Track | 76 1/2" |
| ABS | 4S2M |
| Axle 1 | Fixed Type 30/30 ABS |
| Axle 2 | Fixed Type 30/30 ABS |
| Axle 3 | Super Lift Type 30 Non-ABS |
| Axle 4 | Hydraulic Flip Type 30 Non-ABS |
| Suspension Type | Cush Air Ride Suspension - 25K |
| Dump Type | Auto |
| Ride Height Adjuster | Yes |
| Flip Axle Set Up | Set up for hydraulic powered flip |
Wheels & Electrical
| Tire | 275/70R x 22.5 "H" |
|---|---|
| Rims | 8.25 x 22.5 Hub Piloted All Aluminum |
Options & Finish
| Fenders | — |
|---|---|
| Motor | 13 HP Honda - Gas |
| Flip Box Set Up | — |
| Wide Load Sign Cutout | — |
Notes
Expanded metal in the 1st 3 bays and last 3 bays of main deck
All tires to be Michelin brand & outer DURA-BRITE wheels
Add (4) additional marker lights down each side of main deck
D-rings in bays 1, 4th, 7th, last bay, and middle of bucket pan
(4) d-rings to be added inside of boom well
(2) d-rings on top of rear deck beams, at the start of the flat area
D-rings added to side flange of rear deck at the start of the transition and both sides of each bolster opening
Bucket pan to be 1/2" steel
Trailer to be built with hyd flip stinger capabilities, includes all valves and plumbing
Pony motor lid must be bolt on
All D-rings to be the large bent D-rings (same as main deck D-rings)
No drawing image on file.
